EH10K-16

10 kW all-in-one home energy storage system with 16 kWh LiFePO4 (EH10K-16)

An all-in-one home energy storage system combining a 10 kW hybrid inverter and a 16.08 kWh LiFePO4 battery in a single floor-standing cabinet on castors. It runs a full household - air conditioning, fridge, washing machine and TV at the same time - and switches to battery automatically when the grid fails. Up to six units can be paralleled for larger homes or small commercial buildings.

Request a quote Download the datasheet (PDF)

Tested before shipping
OEM branding available
FOB or CIF worldwide

Manufactured by AB-iPower Co., Ltd, Chongqing, China

EH10K-16

Inverter: 10 kW, 230 V
Battery: 16.0768 kWh LiFePO4
Max PV input: 10 kW
Parallel units: Up to 6 (60 kW)

Specifications

Technical specifications

Inverter
Rated output power	10 kW
Rated output voltage	230 V
Max PV input power	10 kW
Max PV input voltage	500 Vdc
MPPT voltage range	125-425 Vdc
Max DC input current	22 A x 2

Battery
Type	LiFePO4, 16S1P
Capacity per pack	314 Ah
Usable energy	16.0768 kWh
Nominal voltage	51.2 V
BMS protection current	205 A
Charge cut-off voltage	57.6 V
Discharge cut-off voltage	42.4 V
Max charge / discharge current	200 A / 200 A
Cycle life	8,000 cycles, 70 % DoD at 25 C

Environment
Charging temperature	0 to 60 C
Discharging temperature	-30 to 60 C
Storage temperature	0 to 35 C (up to 1 year)
Humidity	0-95 % RH, non-condensing

Advantages

Why operators choose the EH10K-16

One cabinet, wired and tested

One cabinet: inverter, battery, BMS and EMS already wired and factory-tested, so installation time on site is short.

Runs the whole house

10 kW output runs air conditioning, fridge, washing machine and TV together, which is what a family actually needs during an outage.

Up to six units in parallel

Up to six units in parallel: the same product covers a small apartment and a large villa or shop.

Solar, grid or generator

Charges from solar, grid or a diesel generator, and switches source without interrupting the house.

LiFePO4 with BMS and EMS

LiFePO4 cells with BMS and EMS monitoring voltage, current and temperature in real time.

Fits a garage or balcony

Fits a garage, a basement or a balcony; castors make it easy to move into place.

Home energy storage that installers can fit in a day

The EH10K-16 puts the hybrid inverter, the LiFePO4 battery, the BMS and the energy management system in a single cabinet. There is no rack to assemble, no external inverter to wire, and no battery balancing to configure on site: the unit arrives assembled and tested, on castors, ready to be positioned and connected.

For the household, the promise is simple. The 10 kW output covers the appliances that matter during an outage, and the 16.08 kWh battery carries an evening and a night. Charging comes from rooftop solar, from the grid at off-peak rates, or from a generator.

For the installer or distributor, the value is the short installation time, the anti-mistake connectors and the 8,000-cycle cell life at 70 % depth of discharge.

Applications

Where it is used

Houses and villas with rooftop solar
Backup power during grid outages
Time-of-use arbitrage: charge off-peak, discharge at peak
Small shops, offices and clinics
Weak-grid and island homes

FAQ

How long will it run a house?

The battery stores 16.08 kWh, so at an average household load of 2 kW it runs for about 8 hours. With rooftop solar recharging the battery during the day, it can carry the evening and night between charges.

Can several units be installed together?

Yes, up to six units in parallel, for a total of 60 kW and about 96 kWh. The same product therefore covers a small apartment as well as a large villa, shop or small commercial building.

What happens when the grid fails?

The unit switches to battery automatically and keeps the house supplied. Its 10 kW output can run air conditioning, a fridge, a washing machine and a TV at the same time, and it can recharge from solar, the grid or a diesel generator.

How much solar can it accept, and what is the cell life?

The inverter accepts up to 10 kW of PV, with 500 Vdc maximum input, an MPPT range of 125 to 425 Vdc and 22 A × 2 DC input current. The 314 Ah LiFePO4 cells are rated for 8,000 cycles at 70 % depth of discharge at 25 °C.

How long does installation take?

The inverter, battery, BMS and EMS arrive in one cabinet, already wired and factory-tested, on castors. There is no rack to assemble or external inverter to wire, which keeps installation simple, and AB-iPower provides installation assistance if needed.

Do you supply installers and distributors?

Yes. This range is sold factory-direct to installers, distributors and solar EPCs, with OEM branding on request. The minimum order is one unit with a 5 % discount from 8 units; payment is a 30 % deposit and the balance before shipment, FOB or CIF.